How to Make a Face Mask
How to Make a Face Mask
(Revised March 24, 2020)
Front: 100% unused cotton fabric – no metallic fabrics
Back: 100% unused cotton or cotton flannel
Attachment: 1/8”, 1/4”, or 3/8” flat elastic (white is preferred, black is OK)
Four 15” x 1/4” inch bias-tape style ties (no raw edges, white/light preferred, black/dark OK)
Fabric Mask Making FAQ page on the Dartmouth-Hitchcock Facebook page for specific fabric information.
How to Make a Face Mask
A video and instructions for making the masks can be found at this website (thank you to the Turban Project and
Deaconess Health System). We strongly recommend watching the very helpful video from Deaconess. For your
convenience, we’ve listed the instructions here as well.
(Note: The instructions list three sizes: Small, Medium, and Large. We would recommend making Small- and Medium-
sized masks primarily. If possible, making a few Large masks would be helpful as well. See instructions for cutting sizes.)
1) Cut two rectangles of fabric, one for the inside, one for the outside.
a. Small: 7.5 x 5 inches
b. Medium: 9 x 6 inches
c. Large: 10 x 7 inches
2) Cut elastic or ties. All ties can be ¼” x 15”. You will need 4 for each mask (one for each corner). Elastic should be
cut as follows. You will need 2 pieces for each mask.
a. Small: 6.5 inches
b. Medium: 7 inches
c. Large: 7.5 inches
3) Put right sides of cotton mask fabric together.
4) Starting at the center of bottom (long) edge, sew to the first corner, stop. Sew a piece of elastic or a fabric tie
into the corner. A few stitches forward and back will hold this.
5) Sew to the next corner, stop, and bring the other end of that same elastic to the corner and sew a few stitches
forward and back. If you are using fabric ties, add a new tie.
6) Now sew across that top of the mask to the next corner. Again put a 7” length of elastic in the corner (or a new
7) Sew to the next corner and sew in the other end of the same elastic (or a new tie).
8) Sew across the bottom leaving about 1.5” to 2” open. Stop, cut the thread.
9) Turn mask right-side out.
10) Pin 3 tucks on each side of the mask. Make sure the tucks are in the same direction. There must be 3 tucks to
ensure a tight fit on the face.
11) Sew around the edge of the mask twice.
12) When you have finished your masks, please use a Sharpie marker to mark a 1” tall S, M, or L on the lower left
corner of the inside of each mask to indicate the size. This will help providers select the correct size. If you do
not have a Sharpie, please somehow designate size for the masks before you drop them off.
Related links:

Progressive Muscle Relaxation
Make a secchi disk - How to
How to grow a mango tree
How to draw a Pedigree
Make the packthread loop
This content was uploaded by our users. We assume they did it in good faith and they have the permission to share this document. If you own the copyright to this document and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Report Copyright/DMCA form